Custom Driveway Gates in Wilton
Wilton's deep setbacks and wide frontages leave room for a grand entrance — a wide dual-swing or a long cantilever — and make the gate the property's most visible statement.
$1,500 Off
Your Custom Gate & Opener Installation
Get a Free Estimate
FREE same-day estimates on all gate projects.
Industry-Leading Equipment
We install and service gate automation, access control, and safety systems from the most trusted manufacturers in the industry.
- LiftMaster
- DoorKing
- HySecurity
- Viking Access
- Nice
- FAAC
- Nice Apollo Gate Openers
- Maximum Controls
- All-O-Matic
- USAutomatic
- Linear
- DoorBird
Built to Last. Designed for Wilton.
Browse a selection of custom driveway gates, gate operators, and entry systems designed and installed by DC Controls throughout the Wilton area.
Tap images to enlarge
Custom Driveway Gates in Wilton, CA
Wilton is rural enough that the gate is often the first and most visible thing about a property — set well back from the road, framing a long approach across open ground. That space is a gift: it leaves room for a wide dual-swing or a long slide without crowding the right-of-way. We design and build each gate in-house so the proportions, the infill pattern, and the way it sits against the house are chosen for your entrance, not pulled off a shelf.
Room to make an entrance
Where a suburban lot forces compromises, a Wilton property typically offers the opposite problem — enough frontage and setback that the question becomes what you want the entrance to say. A wide double-swing reads as a traditional estate gate; a long cantilever slide gives a cleaner, more horizontal line and keeps the full drive open for trucks and trailers, which matters on the acreage lots out here. Existing pillars, or a new set built to a grander scale, fix the clear opening and tell us whether the design wants one large leaf or a balanced pair. Because the gate is so prominent against open ground, the panel pattern and infill are doing real aesthetic work, not just filling a frame.
Heavy-gauge steel or ornamental iron with a solid visual presence, powder-coated to read as forged metal against the house.
Two balanced leaves on robust posts — the classic estate look where setback gives the arc room to clear.
Floats above the ground on a counterbalanced beam; ignores grade and keeps the whole driveway width open for larger vehicles.
Warmer, more rustic panels over a steel frame, matched to a farmhouse or ranch elevation and finished to hold up to sun.
Building it to survive the valley climate
A big gate on an open lot takes the full brunt of the seasons. Wilton's hot summers drive thermal expansion that works on welds and finishes, and the long UV exposure fades powder coat and dries out wood or composite infill over years. Wet winters combined with the fine dust that settles here can grind at hinge bearings and rollers on some sites. None of that is unique to Wilton, but it is why we over-build the parts that carry load: heavier hinges and greasable bearings, a robust frame gauge sized to the panel's weight and area, and finishes chosen to resist fade. An undersized operator on a heavy gate is the classic way these systems fail early, so we match the motor to the gate's real weight and daily cycles rather than the other way around.
Where a wide custom gate goes wrong
- A stock panel stretched or cut to span a wide rural opening — the proportions and top line stop reading as intentional.
- Frame gauge too light for the leaf's size and weight, so a big gate sags at the latch edge within a season or two.
- Operator sized to the gate's dimensions instead of its real weight and cycle count; it strains and burns out.
- Solid infill on an exposed frontage with no wind consideration — hinges and posts take the load they weren't specced for.
- Wood or composite infill chosen for looks alone, with no plan for how it handles years of direct sun.
One shop handles the whole job — design, fabrication, installation and service — at DC Controls, family-owned and based in Loomis, serving Wilton and greater Sacramento for 25+ years. Licensed CA #1114559 (General Building, C-13 Fencing, D-28 Doors/Gates & Activating Devices), $25k bond, workers'-comp insured, BuildZoom 93. Automated gates use UL 325-listed operators with the required monitored entrapment-protection devices; gates built to ASTM F2200.
Wilton Custom Driveway Gate FAQ
Should I go with a wide swing or a slide?
Both work on most Wilton lots because you have the space. A dual-swing gives the traditional estate look; a cantilever slide keeps the full driveway width open for trucks and trailers and doesn't care about grade. We typically walk the approach with you and let the way you use the drive decide.
Can you build a gate large enough for my opening?
Yes — wide openings are routine out here. The key is engineering the frame and hardware for the span so a big leaf doesn't sag. We size the gauge, hinges and posts to the actual dimensions and weight, and for very wide clear spans a bi-parting pair or a cantilever often makes better structural sense than one enormous leaf.
How do you keep a wood-look gate from failing in the sun?
We steer toward composite or clad panels over a steel frame and finishes chosen to resist UV, rather than raw timber that checks and warps in years of direct sun. The steel carries the structure; the infill carries the look. It is a material choice made up front, at design time.
Do you build the gate yourselves?
Yes. Design, fabrication, installation and service are all DC Controls, not subcontracted. That is what lets us build to your exact opening and your home's style rather than fitting a catalog part — and it means one company stands behind the whole system.
Will an automated gate open during a power outage?
When it's specced with battery backup, which is worth doing on a rural property where outages happen. Automated gates use UL 325-listed operators with the required monitored entrapment-protection devices, and the backup lets the gate cycle when the grid is down.
Serviced ZIP Codes: 95693
Other Service Areas
Why DC Controls
The Right Choice for Your Gate Project
Free, No-Pressure Estimates
Clear, upfront pricing with zero hidden costs.
25+ Years of Experience
Local craftsmanship trusted for decades.
Second-Generation Service
Our team will still be around when your gate needs service.
Top-Quality Materials
Built for security, reliability, and lasting durability.
Fully Licensed & Insured
Confidence and protection every step of the way.
Clean, Respectful Crews
We treat your property like it's our own.
Ready to start your gate project?
Clear, upfront pricing — no pressure, no surprises.
Custom Gate & Opener Installation
Get a custom automatic gate installed for your home. Free consultation included.
Claim OfferAbout Us
Licensed and Certified
Contact Us
5.0
out of 5 stars
Hundreds of Happy Customers
Real reviews from real customers — see what they have to say about their experience with DC Controls.
Daniil S.
13 June 2026
Guys definitely know what they are doing. We have them instal a motor and recently upgraded our keypad. Use them once and you will be with them for the long run.
Sergey S.
12 June 2026
I recently had a gate opener installed at my house and couldn’t be happier with the service. The installation was clean, efficient, and completed exactly as promised. The technician was knowledgeable, friendly, and answered all of my questions. Highly recommend!
Valerie Q.
19 May 2026
Thank you Alex and Daniel and Julian! We appreciate the excellent customer service and the extra effort to make sure everything was running smoothly for us! 😊 …
Design Your Custom Driveway Gate in Wilton
Schedule a free design consultation with DC Controls for a custom driveway gate tailored to your Wilton property. Licensed C-13 contractor.