Custom Driveway Gates in Antelope
Antelope's moderate setbacks and two-car drives leave room for a swing, with a slide for wider entries — steel or aluminum on a stucco-and-tile home.
$1,500 Off
Your Custom Gate & Opener Installation
Get a Free Estimate
FREE same-day estimates on all gate projects.
Industry-Leading Equipment
We install and service gate automation, access control, and safety systems from the most trusted manufacturers in the industry.
- LiftMaster
- DoorKing
- HySecurity
- Viking Access
- Nice
- FAAC
- Nice Apollo Gate Openers
- Maximum Controls
- All-O-Matic
- USAutomatic
- Linear
- DoorBird
Built to Last. Designed for Antelope.
Browse a selection of custom driveway gates, gate operators, and entry systems designed and installed by DC Controls throughout the Antelope area.
Tap images to enlarge
Custom Driveway Gates in Antelope, CA
When we design a custom gate for an Antelope property, the lot layout typically points the way. Moderate setbacks and a typical two-car driveway approach often leave adequate room for a swing gate, though a V-track slide may be the better call on a wider entrance or where turnaround space is tight. The architecture — often a mix of stucco and tile with some traditional accents — guides material toward powder-coated steel or aluminum. We design and fabricate each gate in-house so it complements the home rather than clashing with it.
Layout first, then the fit
A moderate setback and a standard two-car approach typically give a swing gate the room it needs, so on many Antelope lots that's the straightforward choice. A wider entrance, or a tight turnaround, can tip it toward a V-track slide that opens the full width without an arc. We often find existing pillar spacing that accommodates standard panel widths, but custom fabrication is common when the columns call for a specific infill pattern or a unique pivot style to keep the property's look consistent. And because lot exposure here is generally open, the structural spec has to account for wind loading — particularly on a solid panel — so the hinges and posts aren't overstressed.
| Moderate setback, two-car drive | Room for a swing gate on most lots. |
|---|---|
| Wider entrance / tight turnaround | V-track slide that opens the full width without an arc. |
| Stucco-and-tile homes | Powder-coated steel or aluminum matched to the elevation. |
| Open, exposed lot | Structure sized for wind loading, especially on solid panels. |
Fabricated against the valley climate
Antelope's summer heat routinely exceeds 100 degrees, and that heat can degrade the electronic components inside a gate operator — shortening control-board and battery-backup life unless the enclosure is properly ventilated. Persistent UV fades powder coat and embrittles plastic parts like photo-eye housings and wiring insulation over years, which is why we spec higher-grade, UV-stabilized materials from the start. Wet winters can drive moisture into unprotected steel welds and hinge pins, so stainless hardware or robust galvanization matters at the critical points. Dry-season dust abrades operator gearboxes and fouls safety sensors on some sites, calling for sealed bearings and a regular cleaning routine. Heavy gates cycling daily accelerate wear, which drives our choice of heavier-duty components.
Everything in-house — design, fabrication, installation and service — at DC Controls, family-owned and based in Loomis, serving Antelope and greater Sacramento for 25+ years. Licensed CA #1114559 (General Building, C-13 Fencing, D-28 Doors/Gates & Activating Devices), $25k bond, workers'-comp insured, BuildZoom 93. Automated gates use UL 325-listed operators with the required monitored entrapment-protection devices; gates built to ASTM F2200.
Antelope Custom Driveway Gate FAQ
Will a swing gate fit my two-car driveway?
On most Antelope lots, yes — a moderate setback typically gives a swing the room it needs. Where the entrance is wider or the turnaround is tight, a V-track slide opens the full width without an arc. We measure the approach to confirm which fits best.
My columns are already there — can you build to them?
Yes. Existing pillars often take a standard panel width, and where they call for a specific infill or a unique pivot style we fabricate custom to fit. We measure the true spacing so the gate drops cleanly into the columns you have.
Does the summer heat hurt the operator?
It can — heat over 100 degrees is hard on control boards and battery backups. We use a properly ventilated enclosure and size the operator to the gate so it isn't straining, which keeps the electronics running cooler and longer.
My lot is open — is wind a concern?
It can be on a solid panel. Open exposure catches more wind, so we size the frame gauge, hinges and posts for the load. If you'd prefer a lighter wind story, an open pattern helps; either way we build the structure for the exposure.
Serviced ZIP Codes: 95843, 95621
Other Service Areas
Why DC Controls
The Right Choice for Your Gate Project
Free, No-Pressure Estimates
Clear, upfront pricing with zero hidden costs.
25+ Years of Experience
Local craftsmanship trusted for decades.
Second-Generation Service
Our team will still be around when your gate needs service.
Top-Quality Materials
Built for security, reliability, and lasting durability.
Fully Licensed & Insured
Confidence and protection every step of the way.
Clean, Respectful Crews
We treat your property like it's our own.
Ready to start your gate project?
Clear, upfront pricing — no pressure, no surprises.
Custom Gate & Opener Installation
Get a custom automatic gate installed for your home. Free consultation included.
Claim OfferAbout Us
Licensed and Certified
Contact Us
5.0
out of 5 stars
Hundreds of Happy Customers
Real reviews from real customers — see what they have to say about their experience with DC Controls.
Daniil S.
13 June 2026
Guys definitely know what they are doing. We have them instal a motor and recently upgraded our keypad. Use them once and you will be with them for the long run.
Sergey S.
12 June 2026
I recently had a gate opener installed at my house and couldn’t be happier with the service. The installation was clean, efficient, and completed exactly as promised. The technician was knowledgeable, friendly, and answered all of my questions. Highly recommend!
Valerie Q.
19 May 2026
Thank you Alex and Daniel and Julian! We appreciate the excellent customer service and the extra effort to make sure everything was running smoothly for us! 😊 …
Design Your Custom Driveway Gate in Antelope
Schedule a free design consultation with DC Controls for a custom driveway gate tailored to your Antelope property. Licensed C-13 contractor.