Custom Driveway Gates in Davis
Davis lots are flat, so a swing opens inward and needs driveway depth — or a V-track slide steps in on a tight setback, drawn to a ranch or modern-infill home.
$1,500 Off
Your Custom Gate & Opener Installation
Get a Free Estimate
FREE same-day estimates on all gate projects.
Industry-Leading Equipment
We install and service gate automation, access control, and safety systems from the most trusted manufacturers in the industry.
- LiftMaster
- DoorKing
- HySecurity
- Viking Access
- Nice
- FAAC
- Nice Apollo Gate Openers
- Maximum Controls
- All-O-Matic
- USAutomatic
- Linear
- DoorBird
Built to Last. Designed for Davis.
Browse a selection of custom driveway gates, gate operators, and entry systems designed and installed by DC Controls throughout the Davis area.
Tap images to enlarge
Custom Driveway Gates in Davis, CA
Davis is flat, which shapes a custom gate in a specific way: a swing gate typically opens inward, and that means the driveway needs enough depth for a car to clear the arc — or, on a tighter setback, a V-track slide takes over. The architecture ranges from traditional ranch to modern infill, guiding material from clad-wood panels over a steel frame to horizontal aluminum slats. We design and fabricate each gate in-house to the opening, the setback, and the home's style.
Flat ground, inward swing, and depth
On a flat Davis lot, a swing gate typically opens inward, so the real question is whether the driveway has the depth to let a vehicle pull in clear of the arc. Where it doesn't — a tight setback near the street — a V-track slide is the practical answer, running parallel to the fence line with no arc to worry about. Existing pillar spacing or property-line constraints directly set the clear opening and decide whether a single or double swing is feasible, along with the structural demands on the support posts. Lot exposure matters too: on a corner parcel or a lot facing a busy street, homeowners often choose solid infill for privacy, which adds weight and feeds the pivot style and operator selection.
Tight setback near a busy street, craftsman home
Take a craftsman home on a corner near a busy street, with a shallow setback that wouldn't give an inward swing the depth it needs. Here's how we'd handle it: rather than force a swing, we'd design a V-track slide with a clad-wood infill matched to the craftsman elevation, sized to the true opening between the posts and giving the privacy a busy-street lot wants. We'd size the support posts for the panel weight, finish it to resist the valley sun, and hang it with a UL 325-listed operator and the monitored entrapment-protection devices the application needs, plus battery backup.
Fabricated for valley heat, fog and dust
The Central Valley heat cycles and pervasive UV in Davis chalk and fade powder-coated finishes over years, compromising the steel and inviting rust if the coating wasn't specified correctly. The same thermal cycling fatigues welds and fasteners on heavier gates. Wet winters, sometimes with Tule fog, push moisture into operator enclosures, corroding control boards and shortening battery-backup life. Fine dust off surrounding ag land works into operator mechanisms on some sites, gumming gears and limit switches. We answer it at the drawing stage — a robust finish specified for the sun, sealed enclosures, sealed bearings, and a higher duty-cycle operator sized to the gate — so it stays reliable through the seasons.
Everything in-house — design, fabrication, installation and service — at DC Controls, family-owned and based in Loomis, serving Davis and greater Sacramento for 25+ years. Licensed CA #1114559 (General Building, C-13 Fencing, D-28 Doors/Gates & Activating Devices), $25k bond, workers'-comp insured, BuildZoom 93. Automated gates use UL 325-listed operators with the required monitored entrapment-protection devices; gates built to ASTM F2200.
Davis Custom Driveway Gate FAQ
My driveway is short — will an inward swing work?
Only if there's enough depth for a car to pull in clear of the arc. On a tight setback there typically isn't, and a V-track slide is the better answer — it runs along the fence line with no arc. We measure the depth to confirm which fits.
I'm on a busy street — how do I get privacy?
Solid or dense infill blocks sightlines from the street, and we design the gate's weight and operator around that choice. It's a common request on corner and busy-street lots here, and straightforward as long as the posts and operator are sized for the added weight.
Can you match a modern-infill home?
Yes. A clean horizontal aluminum slat reads well on a modern-infill front, while a craftsman might want clad-wood over steel. We draw the gate to your elevation before fabricating in-house, so it looks like part of the house.
Does the Tule fog affect the operator?
Damp and fog can find unsealed electronics over time, corroding boards and stressing the battery backup. We use sealed enclosures and size the operator to the gate so it isn't straining, which keeps the electronics reliable through foggy winters.
Serviced ZIP Codes: 95616, 95618, 95617
Other Service Areas
Why DC Controls
The Right Choice for Your Gate Project
Free, No-Pressure Estimates
Clear, upfront pricing with zero hidden costs.
25+ Years of Experience
Local craftsmanship trusted for decades.
Second-Generation Service
Our team will still be around when your gate needs service.
Top-Quality Materials
Built for security, reliability, and lasting durability.
Fully Licensed & Insured
Confidence and protection every step of the way.
Clean, Respectful Crews
We treat your property like it's our own.
Ready to start your gate project?
Clear, upfront pricing — no pressure, no surprises.
Custom Gate & Opener Installation
Get a custom automatic gate installed for your home. Free consultation included.
Claim OfferAbout Us
Licensed and Certified
Contact Us
5.0
out of 5 stars
Hundreds of Happy Customers
Real reviews from real customers — see what they have to say about their experience with DC Controls.
Daniil S.
13 June 2026
Guys definitely know what they are doing. We have them instal a motor and recently upgraded our keypad. Use them once and you will be with them for the long run.
Sergey S.
12 June 2026
I recently had a gate opener installed at my house and couldn’t be happier with the service. The installation was clean, efficient, and completed exactly as promised. The technician was knowledgeable, friendly, and answered all of my questions. Highly recommend!
Valerie Q.
19 May 2026
Thank you Alex and Daniel and Julian! We appreciate the excellent customer service and the extra effort to make sure everything was running smoothly for us! 😊 …
Design Your Custom Driveway Gate in Davis
Schedule a free design consultation with DC Controls for a custom driveway gate tailored to your Davis property. Licensed C-13 contractor.